DIMM-PC®/VGA2


VGA Module - new design with TOPRO controller.
  • VGA LCD part (VGA Graphics for CRT and flat displays LCD resolutions)
  • 1 MByte video memory
  • Power requirements: 5 Volt only power supply low power CMOS
  • Dimensions: 68 x 40 mm (2.7 x 1.6”)
  • And more...

Add to Info Request

Add to Compare



Overview
Specifications
Downloads

IMPORTANT: The LCD interface has changed on the DIMM-PC®/VGA2 !

The DIMM-PC®/VGA2 is an add-on module for the DIMM-PC® series.

The VGA LCD parts highly integrated VGA controller can directly drive monochrome, passive color (STN) and TFT displays. The connected display is automatically recognized via cable confi guration and the timing is correspondingly adjusted - plug and play. Resolutions on CRT go up to 1024x768, however on LCD maximum resolution is limited to 800x600. A high graphic performance is achieved by means of special features such as hardware cursor, color expansion, 32 Bit memory and 16 bit I/0 access. 1 MByte graphic memory and a 128 kByte PROM holding the VGA-BIOS are onboard.

The DIMM-PC®/VGA2 is designed for a 144pin DIMM connector known from notebooks as memory socket. Note that this connector is different to the used for the DIMM-PC®/CPU itself. The pinout of DIMM-PC®/CPU and DIMM-PC®/VGA2 are well considered, so an easy and short routing on the customers design is possible (a direct pin to pin connection).

Sales

Support

Info Request

Comparisons


Products Menu